|
Post by tammat89 on Mar 10, 2010 13:51:00 GMT
blitzkrieg, thank you very much, but I still can't load windows, it freezes but without artifacts.
|
|
|
Post by tammat89 on Mar 10, 2010 15:24:10 GMT
Sorry, it was my fault. This time before flashing I fully remove my geforce drivers - uninstall them and then used Driver Cleaner Pro in safe mode. But now I can't install 177.83 drivers. It was written in booim's manual: "13. Make sure you wait a little while for Windows to finish installing the default VGA compatible driver for your display (you can check it in the device manager if the device exist, otherwise you will need to wait for it to appear)." Windows doesn't start installing the default VGA compatible driver for some reason. But nevertheless many thanks for working rom, blitzkrieg.
While installing drivers it is written that they are unsigned and Windows stops installing them.
|
|
|
Post by blitzkrieg on Mar 10, 2010 17:30:02 GMT
Tammat, this souns a driver problem, rather than a bios error.I would like to know if the rom worked and you get rid of the nasty artefacts in the end, or the problems persists and i could take another look at your rom. You speak about driver 177.83, but the patch can be applied only to 182.08 version, in order to have fully OpenGl support.Is this a typo, or you're trying to install a driver that cannot be patched... Did your system recognized your card as an QFX3700? If you use vista or win 7 you'll have to use ReadyDriver Plus in order to install the unsigned driver.
|
|
|
Post by tammat89 on Mar 10, 2010 19:41:40 GMT
Sorry. its a missprint. Ofcourse I installed 182.08. Your rom works fine. GPU-Z shows quadro, no artifacts, thanks for your rom ). I use 7 64 bit. I installed ReadyDriver Plus yesterday, but I don't know whether it works now. I'll try to install it one more time and then try to install drivers. Thank you for help )
Update.
I've installed ReadyDriver Plus. Then I've installed 182.08 drivers. There were no any messages about unsigned drivers this time. But when I restsrted no changes were applied. In device manager it shows quadro fx 3700 but with yellow triangle, which means - "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)". I'll try to uninstall driver again in safe mode, then install ReadyDriver Plus and 182.08. Hope it will help. Thanks again.
|
|
|
Post by teanotes on Mar 10, 2010 21:26:01 GMT
Tried the rom, still doesn't work, blows artifacts all over the screen, especially in windows. Well... I'm out of ideas... I don't know how and which timings to change and I don't even want to think of other mods like voltage, so... if anyone has any time to check this problem out, I'd very much appreciate it.
Thanks for all blitz. I'd really like to have this working. Oh well...
|
|
|
Post by blitzkrieg on Mar 10, 2010 23:10:52 GMT
Teanotes, don't lose the hope, now I'm tired but tomorrow i'll take another look at your bios and i'm sure that we'll make it work.Again, I had the same problems like yours and I managed my card to make it work.Don't lose the hope.It's about memory and it doesn't need to be overvolted See you tomorrow!
|
|
|
Post by blitzkrieg on Mar 10, 2010 23:23:35 GMT
Tammat, I'm glad that we solved the problem with the rom.In fact that is YOUR rom quadrofied .I have an Gigabyte 8800 GT with a rom that made me pulled my hair.So I won't give it to anyone! Regarding your problem with the driver, I'm not sure it doesn't work, even if you have that yellow signs.Do you have the 3D pro applications settings enabled in Nvidia Control Panel?Look here: www.mygarage.ro/attachments/ghiduri-si-tutoriale/43356d1251389752-geforce-g80-g92-mod-quadro-fx-tutorial-si-rezultate-18.jpgIf you could find the presets for cad and 3d apps, like in the picture, it looks that it's all fine and the driver is properly installed !
|
|
|
Post by tammat89 on Mar 10, 2010 23:34:29 GMT
Problems again. It seems like ReadyDriver Plus doesn't work. When it choose Driver Plus while booting there apears the screen Windows faild to start, bla bla bla File:\ BOOT\boot.ini. The boot folder is in my system disk, by the way. So I don't know where is the problem. But OK. I press F8 and choose Disable Driver Sidnature Enforcement. Then I tried to install drivers and again - Windows Security window apears with message - Windows can't verify publisher of this driver software. So, what I did wrong?
Drivers doesn't work. I even can't turn on wide screen resolution. System sees my card like Standard VGA Graphic Adapter )
|
|
|
Post by blitzkrieg on Mar 11, 2010 12:36:09 GMT
teanotes, here's the new bios, i modified some things inside, changed the vendor to Nvidia and the board ID (doesn't really matter but i did it anyway).Flash it and tell me how it goes. Attachments:
|
|
|
Post by blitzkrieg on Mar 11, 2010 12:51:48 GMT
Problems again. It seems like ReadyDriver Plus doesn't work. When it choose Driver Plus while booting there apears the screen Windows faild to start, bla bla bla File:\ BOOT\boot.ini. The boot folder is in my system disk, by the way. So I don't know where is the problem. But OK. I press F8 and choose Disable Driver Sidnature Enforcement. Then I tried to install drivers and again - Windows Security window apears with message - Windows can't verify publisher of this driver software. So, what I did wrong? Drivers doesn't work. I even can't turn on wide screen resolution. System sees my card like Standard VGA Graphic Adapter ) I think you have a problem with Driver Ready Plus, there's another program who does the same, maybe you have more luck with it.It's Driver Signature Enforcement Overrider: www.ngohq.com/home.php?page=dseoAlso you could make a test and install the latest Quadro unpatched driver, in order to see if your card works properly.Now, that your system sees the card as quadro, you could install ANY quadro driver.System will let you.Just to check that the card works ok with the driver.After you install the lastest quadro driver, open some apps which stress the card, to see how it behaves: some cad, maya, games,play some HD videos.if everything is ok, you could isolate the problem and uninstall the unpatched driver, clean with Driver Sweeper and reinstall the patched driver again in order to have full open gl support. Any chance that the driver was patched wrong?
|
|
|
Post by tammat89 on Mar 11, 2010 17:38:35 GMT
Hi blitzkrieg. Thank you for the link. I flashed aquamac's rom and then tried to install last quadro drivers like you said. But there apeared a message that drivers can not found any quadro card. Maybe there are some problems with rom? I'll try to experiment with different roms now. Unfortanately I have to start work project in several days so if there will not be any luck I'll flash my original rom. But I wanted quadro so much ). I use XSI for 3d, so I don't know whether there will be any benefits from softquadro. Thanks for help.
|
|
|
Post by teanotes on Mar 11, 2010 18:15:51 GMT
Hi blitzkreig, thanks man, the rom works fine now, no artifacts whatsoever BUT there is a problem. It worked... until i installed the quadro drivers (191.87 i think) Now it won't work unless i load up in safe mode. Now, this is clearly a driver issue because if i boot windows normally, my screen goes blank and sais no signal when welcome screen should be up. I'm using Win7 x64. Any suggestions? btw, saw you downclocked the memory speed. If it works now, what would happen if i oc it back to stock. Geez that sounds weird Oc back to stock speeds
|
|
|
Post by blitzkrieg on Mar 11, 2010 18:24:49 GMT
Hi tammat, You say that you flashed Aquamac's rom.What happen with the rom which I prepared to you?I customized it for your card, I don't really understand, lets put things in order.Which rom are u using now and what happen?What card sees your system (without any driver installed) in Device Manager?
|
|
|
Post by blitzkrieg on Mar 11, 2010 18:35:38 GMT
Teanotes, glad it worked.Yes, i downclocked your memory on purpose, because sometimes, the quadro rom reads another timingset and makes videocard's memory unstable.Feel free to go back to your memory default clock if the card is ok.Sometimes, the bios mod leads to signal loss but this ca be solved changing a little the rom.If problem persists and installing the driver leads to monitor standby, i'll take another look.
|
|
|
Post by teanotes on Mar 11, 2010 18:53:12 GMT
Nope... stays black no matter what i do but if it loads it's default drivers, it works. I don't get it if you can and have time, please take another look cause it's getting so close i can smell it OH one more question... my card as an auto-speed fan... this bios doesn't change anything on that side, right?
|
|