Hey thanks for your help, fully functioning with GTX 295 and VoodooHDA
The problem was when i was installing the audio is that it wasnt functioning, and the issue was that you have to delete HDAenabler in the installer as well as AppleHDA in s/l/e folder... then run the latest kext utility with snow leopard support, and then it works absolutely great...
Hi I needed your help I can not set the system. Wanted to ask what method you set her and that used because I tried everything and for me keeps indoors. My configuration ASUS P6T7 WS GTX-275 1792mb Pioneer BD-RW203 Segate 3/1000Gb Intel i7 920 OCZ 4GB 2000 Edirol UR-80
Please can you tell me exactly what your problem is. Below is the method I use for booting a hack for the first time. After you have made the two USB drives, you can re-install as many times as you like.
1. Download my installer from here and install to a flash USB drive. You will need to format the USB drive with GUID partition table. Set your bios to boot from the USB pen drive and your hard disks to AHCI. You will always need this USB drive in place - think of it as your EFI bios. It will find and boot any hard drive partition with Snow Leo on it.
2. Either install Snow Leo to a hard disk on a real mac then move the disk across to your P6T7.
3. Back up your genuine Snow Leopard disk to another large pen drive of around 16 gigs with disk utility using the restore feature on a real mac. You will need to format it as GUID partition table. You should then be able to install from it to another disk but booting from the 1st USB pendrive..
I will do a proper walkthrough when I get a minute.
Understand what is the matter when I set a disk with dear Mac of dy of Hazard & ideneb. Universal (10.5.7-10.6.2) they fly up from the beginning of installation. If I put Empire EFI v.1.085 + Retail 10.6.... also no efekt. Wanted for you to know as you went round these problems. if not hardness give an answer you. And forgive for English I use a translator
PLEASE HELP!!!! I have a p6t7 and a 4870. I have been trying to use the pen drive installer and I keep on getting an error stating that it cannot find mach_kernel. I did not modify the bootlist yet but as far as I understand it this should not cause this error. The only thing that I can think of that may be causing this would be a bad disc but I have already tried several. Has anyone else had this error and solved it or knows what is going wrong? If I try to boot to a disc with empire efi the computer restarts before it even starts loading os x. I'm thinking that it may have something to do with my mobo settings or bios... anyways.... Thanks!
Happy new year everyone, I hope everything's working great for you! It's not the case for me (and it set me very sad) I really can't install Mac OS Snow Leopard on this P6T7WS... Thank you very much for your work, but I'm disapointed than I can't boot the USB pendrive (it said missing BOOTMGR). I've tried with others boot methods, CD, FireWire or USB drives, and it boot, but don't works (empire efi, iboot and many others still waiting for root devices...) I'm running a P6T7 WS SuperComputer with OCZ reaper memory, GTX 470 GPU and whant to install S.L. on a OCZ vertex 2 SSD. On this config I've a RevoDrive for the crapy windows seven to only run adobe premiere cs5 using cuda (for AVCHD working) I've plugged in an USB3 PCIe Card (Asus U3S6) for the black magic design intensity shuttle (for raw hdmi aquiring) Thank you so much for your works and advices. I really hope getting this rolling soon. Have wonderful days
Hi! Thank You so much for answering. I've downloaded and installed nvidia quadro for mac drivers, and after reboot nothing change. Surely there is something I missunderstand, probably chamelon force com.apple.Boot.plist...
this is what I have in apple.com.boot.plist located inside extra folder :
Thank you very much for your inject, but it does not work for me (at the moment). Doing the same Andy Warhol screen as above.
I'm gonna reinstall the entire system for doing this cleaner.
Probably my problem is linked to the fact when I install chameleon it doesn't boot anymore and I have to replace the Extensions.mkext with the one from aquamac (P6T7 BOOTER). But I'm quite lost at this time.
I'ts a pleasure to get your wothy support gigignopechegno & aquamac.
I'm trying to setup sl 10.6.3 retail on this mb. I try many things (booters:efi, nawcom, iboot,easy efi), but in the begin install process macos write: serial atapi incomplete device (er 0x01). What i'm doing wrong? my conf is: P6T7 WS supercomputer 12 gb kingston dd3 sapphire ati radeon HD5770 1gb 1 sas:fuji 150 gb 2 sata WD FALS(1gb) and WD FBYS(1gb) sound: asus xonar DX2
Please help me. i don't sleep 2 night(((. (i can't have acess to computer with mac os, only VMWare 10.6.5 SL )