keds
New Member
Posts: 3
|
Post by keds on Jul 22, 2009 15:46:14 GMT
Hi everyone! I'm new to this forum and to OS X86. I'm a long-time Mac user since the very first G3 processors were released. I discovered the OS X86 scene by accident and have jumped in with both feet... ;D I've built a system and successfully installed the Retail (Vanilla) 10.5 and updated through Apple software update. After much trial and error I managed to find three kexts that give me stable graphics:NVInject, NVDANV50Hal & NVDAResman. However, changing the resolution gives me the blue screen. The display calibration assistant runs, but the actual sliders do not work (alter gamma, etc.) Is anyone aware of a work around for this? The only other kexts installed are: VoodooHDA & OpenHaltRestart. I have QuartzGL enabled (Via OSX86Tools) and use Boot Think (purely because it seems the most "Mac-like" to me.) Thanks
|
|
keds
New Member
Posts: 3
|
Post by keds on Jul 27, 2009 18:12:41 GMT
....tumbleweed blows past.....
|
|
|
Post by aquamac on Jul 27, 2009 20:48:49 GMT
Keds, Welcome
I must have missed this one. You might like to try installing an injector that is much more up to date than NVInject such as NVDarwin to see if this helps.
|
|
keds
New Member
Posts: 3
|
Post by keds on Jul 27, 2009 22:34:18 GMT
Thanks for the welcome Aquamac.
I tried swapping NVInject for NVEnabler and it worked!
I tried for weeks to get this to work - now it does! Thanks very much!
|
|