|
Post by ismael on Mar 22, 2009 17:26:08 GMT
I can not install Leo 10.5.6 I use to boot the DVD: BOOT-KABYLE-BUMBY.iso or GENERIC.iso you put the leopard and restarts when it starts to read the dvd. I tried with-v but does not stop with error. My computer: Core i7 2,66 GA-EX58-UD4P 3X2 GB 1333 ATI ASUS EAH4570 NEC DVD Greetings
|
|
|
Post by aquamac on Mar 22, 2009 20:06:24 GMT
I am wondering if this is core i7 related. Do you have another install of leopard on a hard disk you can plug in and try or is this your first attempt?
|
|
|
Post by ismael on Mar 22, 2009 21:35:47 GMT
I am trying on this computer for the first time. I have tried several ways to install Hackintoch (kalyway, Boot-132 with Original DVD, iPC ...) and nothing. one way or another on the computer restarts,without letting me see the error. I was watching your website and I like your work, I like to do the same with my computer. Greetings
|
|
|
Post by ismael on Mar 24, 2009 13:27:41 GMT
iATKOS_5i I could install. but does not start.
|
|
|
Post by aquamac on Mar 24, 2009 20:32:59 GMT
What happens when you try and boot. Do you see the grey Apple?
|
|
|
Post by ismael on Mar 24, 2009 23:24:27 GMT
|
|
|
Post by aquamac on Mar 25, 2009 2:55:42 GMT
Aha,
Go into your bios, is there a setting to change your HDD's to AHCI? If there is, change to this setting. OSX cannot detect your Hard Disk(s). If you do not have this setting (maybe under the advanced section, could be under raid setting) then you need a modded AHCIPort.kext. Is your motherboard ICH10?
Also what colour Sata port are you connected to, don't connect your disks to the purple jmicron ports, only the yellow AHCI ones.
|
|
|
Post by ismael on Mar 25, 2009 22:42:39 GMT
BIOS > Integrated Peripherals - SATA RAID / AHCI Modo - AHCI
|
|
|
Post by ismael on Apr 13, 2009 11:08:05 GMT
Introducing the chain uuid dvd, it solve the previous error. but fail to start the installer. rd(0,1)/mach_kernel.voodoo boot-uuid=8A69AC47-7A42-3DC6-A3A6-287F58A72406 busratio=20 -v -fWhat should I do?
|
|
|
Post by originalmacnut on Apr 14, 2009 18:23:20 GMT
iATKOS_5i I could install. but does not start. Likely you didn't install the correct driver if you could boot & install.
|
|
|
Post by ismael on Apr 18, 2009 16:14:49 GMT
OK. RAM 400 MHz How to make 1333 MHz? I have the resolution to 1024 x 768 monitor with a Benq 24". My ASUS EAH4670 ATI graphics, an archive that I need to detect?
|
|
|
Post by aquamac on Apr 18, 2009 16:51:54 GMT
Download this: rapidshare.com/files/222896097/AboutThisMac.strings.zip.htmllNavigate to System/Library/CoreServices/loginwindow and right click it and select Show Package Contents. Select Contents/Resources/English and replace "About this Mac Strings". Repair permissions, log out then back in, You're done!
|
|