|
Post by brainman on May 27, 2009 19:29:55 GMT
I'm seriously thinking of putting together a HackPro based on a Workstation board (depending on my financial situation and W.A.F. ). The board I have in mind is the Supermicro X8DAL-i: www.supermicro.com/products/motherboard/QPI/5500/X8DAL-i.cfmChipset: Intel® 5520 (Tylersburg) chipset ICH10R + IOH-36D CPU: Dual 1366-pin LGA Sockets Quad-Core Intel® Xeon®Processor 5500 sequence (Nehalem-EP processor) Memory: 6x 240-pin DIMM sockets Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory HD-ports: 6 SATA ports Controllers: Intel ICH10R SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support Expansion: 1 (x16) PCI-E 2.0 1 (x4) PCI-E 2.0 (in x16 slot) 1 (x4) PCI-E 2x 33MHz PCI slots Network: 2x Intel® 82574L Gigabit Ethernet Controllers 2x RJ45 LAN ports Audio: Realtek ALC883 7.1 HD audio The only thing missing is FireWire, but other than that it looks very promising. And all at a cost of about 300$ +/- I took a quick comparison between the new dual quad core MacPro (basic configuration) and a similar system based on the X8DAL-I (same CPU's, twice the memory and a better Graphics Card) and it came out about 1000$ less than the MacPro. So I must say it is a very tempting project to pursue. Does anyone here have any experience with a Workstation or Serverboard based Hackintosh?
|
|
|
Post by derpuma on Dec 19, 2009 19:18:52 GMT
HI, what about your plan? Did you realized the project? I would like to hear if you had success?
I have a Workstation ASUS P6T6 Board with Xeon 3520 and it works fine!
|
|