|
|
Post by reddrag0n on Aug 22, 2008 21:50:01 GMT
ok
|
|
|
|
Post by reddrag0n on Aug 22, 2008 21:51:03 GMT
OMG, I HAVE AN APPLE LOGO!!!!!!
|
|
|
|
Post by originalmacnut on Aug 22, 2008 21:52:04 GMT
So did it boot?
|
|
|
|
Post by reddrag0n on Aug 22, 2008 21:52:20 GMT
i still have that same apple logo
|
|
|
|
Post by aquamac on Aug 22, 2008 21:53:04 GMT
If you do get back into it, I suggest cloning to another HDD or Partition as the road to a successful setup is a long one and with Hardware that has not yet been proven, it is likely you will trash your install more than once. If you clone your current HD (providing you can get it to boot), you can install the boot sector after using OSX86 Tools from PCWizz. pcwizcomputer.com/osx86tools/?page_id=4 |
|
|
|
Post by reddrag0n on Aug 22, 2008 21:54:39 GMT
how about this, wait until i get more compatible hardware and if i want to run anything on a mac, i just use my upgraded QS?
Oh, by the way, it's still on that same apple logo, halted.
|
|
|
|
Post by originalmacnut on Aug 22, 2008 21:56:24 GMT
I suspect it is agpgart as before.
Boot with -s option,
then mount -uw /
then rm -fr /System/Library/Extensions/AGPGart.kext
then rm /System/Library/Extensions.mkext
then reboot with -v -f
Edit*
If it boots after that, add back the natit.kext from the installer, it may work after that, but we'll trouble shoot after we get there.
|
|
|
|
Post by aquamac on Aug 22, 2008 21:58:34 GMT
Yup, that might work, give it a go!
|
|
|
|
Post by reddrag0n on Aug 22, 2008 22:04:11 GMT
well, del Extensions.mkext = no such file or dir, rebooted anyways using -v -f and she KP'ed half way through
|
|
|
|
Post by reddrag0n on Aug 22, 2008 22:07:50 GMT
well, rebooted with -v -f again and now it got past the KP and now stuck on light blue screen, no mouse
|
|
|
|
Post by aquamac on Aug 22, 2008 22:12:49 GMT
Try -x again
|
|
|
|
Post by reddrag0n on Aug 22, 2008 22:15:09 GMT
blue screen, this time with mouse
|
|
|
|
Post by originalmacnut on Aug 22, 2008 22:17:19 GMT
I hate to say this, but you will need to remove the x1300 driver kext.
Is it x1300.kext? Then we can start fresh after that is removed.
|
|
|
|
Post by aquamac on Aug 22, 2008 22:17:46 GMT
Red,
Did you remove AGPGart with these commands,
Boot with -s option,
then mount -uw /
then rm -fr /System/Library/Extensions/AGPGart.kext
then rm /System/Library/Extensions.mkext
then reboot with -v -f
Do you have an NV card to try to boot?
|
|
|
|
Post by reddrag0n on Aug 22, 2008 22:18:06 GMT
how about do a fresh install? since there was nothing of value on that drive
|
|
