|
Post by reddrag0n on Dec 1, 2006 2:05:19 GMT
Ok, before i get down to business on this mod, i need some help. I got a Newertech MAXpowr G3 L2(A) card and it will not show up in OS 9. It still says 180MHz with a 603E processor. Am i missing something? I contacted newertech about software i might be missing, but they have yet to contact me. If anyone out there has software or even info on this little product, it would be appreciated. Here are some pics of what the card looks like.
|
|
kenji
Full Member
Posts: 105
|
Post by kenji on Dec 1, 2006 3:04:15 GMT
I think Newertech has very good drivers and utilities. I once had a Sonnet G4 ZIF and when I used the Sonnet firmware patch for B&W G3, the motherboard died I bought another B&W logicboard and this time I used Newertech B&W G4 Enabler and the Sonner G4 CPU worked. Maybe these links could help: jumper settingdrivers and utilities
|
|
|
Post by reddrag0n on Dec 1, 2006 4:16:51 GMT
Tried both of them, and nothing worked. I had close to 10 different installers and nothing seemed to work with that machine of mine. The page with the jumper settings didn't work either. Each time i tried to set the jumpers, the 6400 wouldn't turn on. Even did a reset pram and still nothing. The machine will only boot up if the jumpers are set to off.
|
|
kenji
Full Member
Posts: 105
|
Post by kenji on Dec 1, 2006 6:51:07 GMT
OK I have a friend with a 6400 and G3 card in it. I'll e-mail him if he has the driver or utilities for your card.
|
|