gassi
New Member
Posts: 1
|
Post by gassi on Jul 4, 2009 14:46:51 GMT
Hi, I am have trouble having problems with my Graphics card after i installed Iatkos v7. Has any had success with this card.If any body has will help or post efi string or whatever methos they used. I have tried nvidia installer for 9 series, nvinstaller, corevidia but nothing seems to work. My pc specs are below.
Acer Aspire 6930G Intel Core 2 Duo T6400 (2.0GHz, 800MHz FSB, 2MB L2 Cache) 3GB of Memory RAM 250GB 5400rpm Hard Disk Drive 16 inch WXGA Acer CineBrite TFT LCD NVIDIA GeForce 9300M GS - 256MB VRAM DVD-Super Multi Double-Layer Blueray Drive Intel Wireless WiFi Link 5100/5300 (dual-band quad-mode 802.11a/b/g/Draft-N) Wi-Fi 5-in-1 Card Reader (SD, MMC, MS, MS PRO, xD) 0.3 MP Crystal Eye Webcam Acer Bio-Protection Fingerprint Solution
|
|
|
Post by pigeon on Sept 24, 2009 12:46:04 GMT
I also have an NVIDIA GeForce 9300M GS (10de:06e9) with 256MB ram, running 10.5.8 (10.5.5 install and then upgraded) on the ASUS N10Jc laptop. Things work ok, but no Quartz Extreme.
I have tried a lot of things, EFI string only, NVinject, NVinstaller, NVenabler, Nvidia Universal Installer, Natit, AquaMac Nvidia, NVkush, but the best it could do was having display resolution changing working, which allows 1024x600. QuartzGL is also working. HDMI also works. But just not Quartz Extreme.
Any suggestions?
Thanks.
|
|
|
Post by abefre on Sept 17, 2011 2:01:57 GMT
Hi I have the same board and I am unable to get my lan or wifi working, can you pls tell me how you got yours working in Lion. Cheers Pat
|
|