|
Post by aquamac on Mar 9, 2009 20:40:34 GMT
As you have 2 ports on your card, if you only have one display connected, then one port will display as not connected and this is quite normal. Can you post a grab of your System Profiler under the graphics heading?
|
|
|
Post by kaedekai on Mar 10, 2009 15:55:43 GMT
Will do once I get home. Thanks =)
|
|
|
Post by kaedekai on Mar 11, 2009 3:44:18 GMT
Hi aquamac,
My System Profile: nVidia GeForce 9800 GTX+ DDL:
Chipset Model: nVidia GeForce 9800 GTX+ DDL Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 512 MB Vendor: NVIDIA (0x10de) Device ID: 0x0613 Revision ID: 0x00a2 ROM Revision: nVidia GeForce 9800 GTX+ DDL OpenGL Engine [EFI] Displays: SAMSUNG: Resolution: 1920 x 1080 @ 60 Hz Depth: 32-bit Color Core Image: Hardware Accelerated Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Supported Rotation: Supported QuartzGL: Supported Display Connector: Status: No display connected
|
|
|
Post by aquamac on Mar 11, 2009 21:01:05 GMT
That looks absolutely fine. BTW, did you try another bluetooth dongle?
|
|
|
Post by kaedekai on Mar 12, 2009 6:51:51 GMT
For the bluetooth dongle, not yet. I am using a micro bluetooth dongle made by AZIO.
The problem I am having is that everytime, I shutdown the computer, and power back on, the keyboard & mice are always disconnected. I have to manually connect them again. Sometimes, the Bluetooth assistant will come up, but it has to re-detect the both the keyboard & mice again.
Looking at some thread, seems like Apple support Dlink DBT-120 bluetooth dongle. But yet, I haven't find one around here.
Shop carry the Dlink DBT-122 version, but googling around seems that it uses a different chipset than the 120, and it is not working very well.
Any suggestion on a bluetooth dongle beside the Dlink 120?
|
|
|
Post by obliviux on Mar 12, 2009 9:47:09 GMT
Hi Aquamac, thank you for all your work!! unfortunately I had some problems with my 9800m GS.. it is a G94 chip, with Device ID 062b (the 9800m GTS is 062C, 9700m GTS is 062A). I had Installed iDeneb v1.4 10.5.6 without any video driver, and it works in SafeMode. than I have installed your Driver for 9000 Series and it work, but Leopard recognise the video card like a 32MB. So i have modified EFI STRINGS and it works well, but NO QE/CI... I had tried everything, NVinject, NVkush, NVdarwin, Titan... So i need your help.. Thank you for all! My SystemProfile: Chipset Model: nVidia GeForce 9800m GS Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 1024 MB Vendor: NVIDIA (0x10de) Device ID: 0x062b Revision ID: 0x00a2 ROM Revision: nVidia GeForce 9800m GS OpenGL Engine [EFI] Resolution: 1366x768 @ 60 Hz Depth: 32-bit Color Core Image: Software Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported QuartzGL: Supported
|
|
|
Post by aquamac on Mar 12, 2009 18:36:12 GMT
So after you tried GFX Strings, did you delete natit nvinject and nvkush and titan? GFX will not work with any of these in your extensions folder.
|
|
|
Post by obliviux on Mar 14, 2009 12:34:30 GMT
Thanks Aquamac, I've deleted all injects but i get Black Screen, only if i delete NVDAResman it works, but no QE/CI... Any suggestion?
Thank you! ^_^
|
|
|
Post by aquamac on Mar 14, 2009 17:00:43 GMT
I just noticed you installed my drivers on 10.5.6, but you should not need to as 10.5.6 has all the mods already. There is mention of this on the page next to the download link. You will have to reinstall 10.5.6 drivers. As you have a laptop try replacing these 10.5.6 kexts that I have put your device id in: rapidshare.com/files/209194349/10.5.6_NV_Drivers.zipYou must repair permissions afterwards with this kext repair script. Leave it going till it's finished, it looks like it's stuck at 20% but it's not. Permissions Repair CommandDon't know if it will work but it's worth a go. You will need to delete Extensions.mkext afterwards, from your System/Library folder and re-boot with -f -v.
|
|
|
Post by obliviux on Mar 15, 2009 11:13:56 GMT
Thank you for your help Aquamac! I have tried but when i install NVDAResman with my device id, i get black screen... I really don't know where is the problem.. I had tried to mod NVDAResman, deleted all the dictionary NVidiaRMTwinView it works, but ever no qe/ci..
|
|
|
Post by aquamac on Mar 15, 2009 15:11:19 GMT
Did you try connecting an external monitor to see if the picture is being output to that?
|
|
|
Post by obliviux on Mar 15, 2009 17:36:56 GMT
Yes, i have connected an external monitor and it works! What this mean??
I had seen that the problem is IOProviderClass under NvidiaRMTwinView of NVDAResman! I have substituted IONDRVDevice with IOPCIDevice and it works (without qe/ci)
|
|
|
Post by aquamac on Mar 15, 2009 18:53:21 GMT
If you have all the correct drivers installed including NVDAResman from 10.5.6 and you connect the external monitor before booting, do you get a picture on the external monitor when you get a black screen on the laptop display?
|
|
|
Post by obliviux on Mar 15, 2009 21:08:05 GMT
No, no one picture on the external monitor with all the original 10.5.6 kexts.. Black screen on all monitor! I can see until Apple logo, after black screen.. If can interest my laptop is an Asus G50Vt-X1, with Intel PM45 motherboard! Thank you again!
|
|
|
Post by aquamac on Mar 15, 2009 21:41:19 GMT
Is your card G92 or G94? I think this should work. Strange that it is not working with any injector kexts.
|
|