|
Post by hekokimushi on May 25, 2012 0:45:35 GMT
fully working. 2x USB. PW LED PW SW Audio
|
|
|
Post by hekokimushi on May 29, 2012 10:18:57 GMT
IDE is 2.54mm you will need a 2.0mm pitch 2*22Pin connector. IDC (FC) sockets simply won't fit... due to apple's "speciality"
|
|
|
Post by novaris on Jul 22, 2012 8:23:16 GMT
I just got the 40 to 44pin adapter but 1 of the ports is keyed and through mac pro front panel side isn't keyed
how did you guys manage to connect the adapter?
|
|
|
Post by hekokimushi on Aug 1, 2012 4:55:27 GMT
use the proper 44pin obviously
|
|
|
Post by novaris on Oct 6, 2012 14:13:24 GMT
I've tried the pinouts as described on page 2 using jumper wires to connect to the onboard usb/audio ports but nothing seems to work.
both usb and audio are not responding. I;ve yet to connect the power switch and power led.
Not sure if it's the fault with the logic board because I used a multimeter and I do get 5v on the usb jumper wires and on the 44pin-40pin adapter but i dont get any reading on the USB's soldering points on the logic board.
I've even tried reversing the 5v with ground and data wires, reversing the orientation of the pinouts but nothing works.
|
|
kmmm
New Member
Posts: 2
|
Post by kmmm on Nov 26, 2012 7:09:12 GMT
fully working. 2x USB. PW LED PW SW Audio Could you please tell us more details on what you have done with this. Thanks.
|
|